Cuplock Systems
Specification of Cuplock Systems
- BS 1139 Part 1,Section 1.1:235 N/mm2 (347 ksi)(24kg/mm2) minimum yield stress; 4.0 mm nominal wall thickness. (Scaffold Safety Hand Book Saudi Aramco.)
- EN 10219;320 N/mm2 (46ksi)(32kgmm2) Minimum yield stress;3.2 nominal wall thickness (Scaffold Safety Hand Book Saudi Aramco.)
Fabricated CuplocK Vertical Standard pipe
Application: Vertical erection of Cuplock system scaffolding
Component Weight: Varies from size to size
Surface Finish: Air dry dip paint
Fabricated CuplocK Horizontal Ledger pipe
Application: Horizontal erection of Cuplock system scaffolding
Component Weight: Varies from size to size
Surface Finish: Air dry dip paint
Cuplock Systems
Cuplock's unique node point connection allows up to four horizontal members to be connected to vertical members in one single action - without the use of nuts and bolts or wedges. The locking device is formed by two cups.
Locate the blade end of Horizontals into lower
Lower the upper cup down
Tighten with a hammer blow
A positive & rigid connection of four units is achieved in one single action.
It can be erected 75% faster than traditional scaffoldings.
Products
Contact Us
Kingdom of Saudi ArabiaI Al Jubail Industrial City Post Box 1396 Al JubaliL 31951
Tel: + 966 3 3619096
Fax: + 966 3 3618032
E-mail: info@arabianspar.com
